MIL-DTL-10958G
identity requirements shall be cause for rejection of the lot of finished product made therefrom,
as applicable.
4.1.1.2 Examination of water. Water shall be examined to determine compliance with the
requirement of 3.1.3 as concerns approval source, by examination of state and local health
certificates. In addition, water shall be examined organoleptically to determine compliance with
condition requirement. Nonconformance to an approval source or condition requirement shall be
cause for rejection of the lot of finished product made therefrom, as applicable.
* 4.1.2 Testing of components. Testing of components described in this specification shall be as
shown below. Results shall be applicable to the lot average. Nonconformance to one or more
test requirements shall be cause for rejection of the lot.
4.1.2.1 Oil components: Cottonseed oil and soybean and cottonseed blend shall be tested for
peroxide value, fat stability (A.O.M.), and solid fat index (SFI) as specified in 3.1.2.
4.1.2.2 Sampling: The sample for testing shall be an approximate 1 pound (0.45 kg) composite
derived from five primary containers or all containers if less than five form a lot. All samples
shall be labeled clearly with adhesive labels bearing the name of the margarine manufacturer,
contract number, time and date of sampling, lot number of oil and source of oil. Samples shall
be shipped to the laboratory in dry ice.
4.1.2.3 Test results: The test results for the peroxide value shall be reported to the nearest 0.1
milliequivalent per 1000 grams. The test results for fat stability (A.O.M.) and solid fat index
(SFI) shall be reported as specified in 3.1.2.
4.1.3 Examination of finished product: The finished product shall be inspected for compliance
with the requirements specified in 3.3 utilizing the double sampling plans indicated in
ANSI/ASQC Z1.4 1993. The lot size shall be expressed in primary containers. The sample
unit for examination of finished product shall be one pound (0.45 kg) from a primary container.
The sample unit for net weight examination shall be one primary container. The inspection level
shall be S-2 and the acceptable quality level (AQL), expressed in terms of defects per hundred
units, shall be 1.5 for major defects and 2.5 for minor defects. Examination shall be
inaccordance with Table I.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business